home *** CD-ROM | disk | FTP | other *** search
- voiceNotFound = -244
-
- incompatibleVoice = -245
-
- badDictFormat = -246
-
- badInputText = -247
-
- midiNoClientErr = -250 •no client with that ID found
-
- midiNoPortErr = -251 •no port with that ID found
-
- midiTooManyPortsErr = -252 •too many ports already installed in the system
-
- midiTooManyConsErr = -253 •too many connections made
-
- midiVConnectErr = -254 •pending virtual connection created
-
- midiVConnectMade = -255 •pending virtual connection resolved
-
- midiVConnectRmvd = -256 •pending virtual connection removed
-
- midiNoConErr = -257 •no connection exists between specified ports
-
- midiWriteErr = -258 •MIDIWritePacket couldn't write to all connected ports
-
- midiNameLenErr = -259 •name supplied is longer than 31 characters
-
- midiDupIDErr = -260 •duplicate client ID
-
- midiInvalidCmdErr = -261 •command not supported for port type
-
- nmTypErr = -299 •Notification Manager:wrong queue type
-
- 1)siInitVBLQsErr •VBLqueues for all slots could not be initialized
- 2)dsAddressErr •address error
- 3)cmFailed 4)ftFailed
- 5)chInUse •requested block in use
- 6)kGSpDeviceError_UnsupportedCall
- 7)kQAOutOfMemory •Insufficient memory
- 8)eRTBadVersion
-
- 1)siInitSPTblErr •slot priority table could not be initialized
- 2)dsIllInstErr •illegal instruction error
- 3)cmTimeOut
- 4)ftTimeOut
- 5)cdevUnset •cdevValue is initialized to this
- 6)chnotfound •requested block not found
- 7)(GX Error) rectangle_zero_width
-
- 1)sdmJTInitErr •SDM Jump Table could not be initialized
- 2)dsLineFErr •line 1111 trap error
- 3)ftNotSupported
- 4)scComplPhaseErr •SCSI bus wasn't in Status phase
- 5)(GX Error) glyph_empty = 10
-
- 1)sdmInitErr •SDM could not be initialized
- 2)dsMiscErr •miscellaneous hardware exception error
- 3)cmUnknownError
- 4)(GX Error) layout_empty = 11
-
- 1)sdmSRTInitErr •Slot Resource Table could not be initialized
- 2)dsCoreErr •unimplemented core routine error
- 3)(GX Error) picture_empty = 12
-
- 1)sdmPRAMInitErr •Slot PRAM could not be initialized
- 2)dsIrqErr •uninstalled interrupt error
- 3)(GX Error) shape_no_fill = 13
-
- 1)sdmPriInitErr •Cards could not be initialized
- 2)dsIOCoreErr •IO Core Error
- 3)(GX Error) shape_no_enclosed_area = 14
-
- smSDMInitErr = -290 •Error; SDM could not be initialized
-
- smSRTInitErr = -291 •Error; Slot Resource Table could not be initialized
-
- smPRAMInitErr = -292 •Error; Slot Resource Table could not be initialized
-
- smPriInitErr = -293 •Error; Cards could not be initialized
-
- smEmptySlot = -300 •No card in slot
-
- smCRCFail = -301 •CRC check failed for declaration data
-
- smFormatErr = -302 •FHeader Format is not Apple's
-
- smRevisionErr = -303 •Wrong revison level
-
- smNoDir = -304 •Directory offset is Nil
-
- smDisabledSlot = -305 •This slot is disabled (-305 use to be smLWTstBad)
-
- smNosInfoArray = -306 •No sInfoArray. Memory Mgr error.
-
- smResrvErr = -307 •Fatal reserved error. Resreved field <> 0
-
- smUnExBusErr = -308 •Unexpected BusError
-
- smBLFieldBad = -309 •ByteLanes field was bad
-
- smFHBlockRdErr = -310 •Error occured during _sGetFHeader
-
- smFHBlkDispErr = -311 •Error occured during _sDisposePtr (Dispose of FHeader block)
-
- smDisposePErr = -312 •_DisposePointer error
-
- smNoBoardSRsrc = -313 •No Board sResource
-
- smGetPRErr = -314 •Error occured during _sGetPRAMRec (See SIMStatus)
-
- smNoBoardId = -315 •No Board Id
-
- smInitStatVErr = -316 •The InitStatusV field was negative after primary or secondary init
-
- smInitTblVErr = -317 •An error occured while trying to initialize the Slot Resource Table
-
- 1)smNoJmpTbl •SDM jump table could not be created
- 2)smReservedSlot •slot is reserved VM should not use this address space = -318
-
- smBadBoardId = -319 •BoardId was wrong; re-init the PRAM record
-
- smBusErrTO = -320 •BusError time out
-
- svTempDisable = -32768L •Temporarily disable card but run primary init
-
- svDisabled = -32640 •Reserve range -32640 to -32768 for Apple temp disables
-
- smBadRefId = -330 •Reference Id not found in List
-
- smBadsList = -331 •Bad sList: Id1 < Id2 < Id3 ...format is not followed
-
- smReservedErr = -332 •Reserved field not zero
-
- smCodeRevErr = -333 •Code revision is wrong
-
- smCPUErr = -334 •Code revision is wrong
-
- smsPointerNil = -335 •LPointer is nil From sOffsetData. If this error occurs; check sInfo rec for more information
-
- smNilsBlockErr = -336 •Nil sBlock error (Dont allocate and try to use a nil sBlock)
-
- smSlotOOBErr = -337 •Slot out of bounds error
-
- smSelOOBErr = -338 •Selector out of bounds error
-
- smNewPErr = -339 •_NewPtr error
-
- smBlkMoveErr = -340 •_BlockMove error
-
- smCkStatusErr = -341 •Status of slot = fail
-
- smGetDrvrNamErr = -342 •Error occured during _sGetDrvrName
-
- smDisDrvrNamErr = -343 •Error occured during _sDisDrvrName
-
- smNoMoresRsrcs = -344 •No more sResources
-
- smsGetDrvrErr = -345 •Error occurred during _sGetDriver
-
- smBadsPtrErr = -346 •Bad pointer was passed to sCalcsPointer
-
- smByteLanesErr = -347 •NumByteLanes was determined to be zero
-
- smOffsetErr = -348 •Offset was too big (temporary error)
-
- smNoGoodOpens = -349 •No opens were successfull in the loop
-
- smSRTOvrFlErr = -350 •SRT over flow
-
- smRecNotFnd = -351 •Record not found in the SRT
-
- notBTree = -410 •The file is not a dictionary
-
- btNoSpace = -413 •Can't allocate disk space
-
- btDupRecErr = -414 •Record already exists
-
- btRecNotFnd = -415 •Record cannot be found
-
- btKeyLenErr = -416 •Maximum key length is too long or equal to zero
-
- btKeyAttrErr = -417 •There is no such a key attribute
-
- unknownInsertModeErr = -20000 •There is no such an insert mode
-
- recordDataTooBigErr = -20001 •The record data is bigger than buffer size (1024 bytes)
-
- invalidIndexErr = -20002 •The recordIndex parameter is not valid
-
- editionMgrInitErr = -450 •edition manager not inited by this app
-
- badSectionErr = -451 •not a valid SectionRecord
-
- notRegisteredSectionErr = -452 •not a registered SectionRecord
-
- badEditionFileErr = -453 •edition file is corrupt
-
- badSubPartErr = -454 •can not use sub parts in this release
-
- multiplePublisherWrn = -460 •A Publisher is already registered for that container
-
- containerNotFoundWrn = -461 •could not find editionContainer at this time
-
- containerAlreadyOpenWrn = -462 •container already opened by this section
-
- notThePublisherWrn = -463 •not the first registered publisher for that container
-
- teScrapSizeErr = -501 •scrap item too big for text edit record
-
- hwParamErr = -502 •bad selector for _HWPriv
-
- procNotFound = -600 •no eligible process with specified descriptor
-
- memFragErr = -601 •not enough room to launch app w/special requirements
-
- appModeErr = -602 •memory mode is 32-bit but app not 32-bit clean
-
- protocolErr = -603 •app made module calls in improper order
-
- hardwareConfigErr = -604 •hardware configuration not correct for call
-
- appMemFullErr = -605 •application SIZE not big enough for launch
-
- appIsDaemon = -606 •app is BG-only and launch flags disallow this
-
-